Design

• Concealed undercut fastening keeps the façade surface free of exposed anchors
• Available in open- and closed-joint configurations
• Options available for flat or irregular panel surfaces

Installation

• Panels are suspended on horizontal support rails for a stable installation
• Concealed attachments allow precise vertical adjustment
• Fixed or permissive rail options allow the system to adapt to different panel conditions

Performance

• Designed for durable exterior façade applications
• Suitable for multiple compatible cladding materials, depending on the selected system
• Can be used for large-format panels and high-rise applications, subject to project review

System Type

Concealed undercut façade fastening system for ventilated cladding applications.

Fixing Method

• Panels are mechanically anchored from the back using undercut anchors.
• Concealed attachments connect to the anchors and allow precise vertical adjustment.
• Panels are suspended on horizontal support rails, keeping the visible façade surface free of exposed face fasteners.

Substructure

• Compatible with wall structures in steel framing, concrete, or wood, depending on project requirements.
• The system can be installed with thermal break attachments or directly on Z-bars, depending on the wall assembly.
• Fixed or permissive horizontal support rails are used depending on the selected MT-N10 system and surface condition.

Project Review

Final cladding selection, panel thickness, joint width, support layout, anchoring method, and structural requirements should be reviewed based on project-specific façade conditions.

MT-N10.10

Open-joint undercut system for flat panel surfaces

MT-N10.10 is designed for concealed panel fastening using undercut anchors. Panels are suspended on fixed horizontal support rails, creating a stable installation with regular open joints and a clean modern façade appearance.

• Surface type: Flat panel surfaces
• Joint type: Open joint
• Joint width: 5 mm to 12 mm
• Cladding thickness: 6 mm to 60 mm, depending on the product
• Compatible cladding: Porcelain, composite panels, fibre cement, terrazzo, and other materials upon request

MT-N10.11

Closed-joint undercut system for flat panel surfaces

MT-N10.11 is designed for concealed panel fastening using undercut anchors. Panels are suspended on fixed horizontal support rails, with horizontal and vertical joint covers used to create a clean, continuous closed-joint façade finish.

• Surface type: Flat panel surfaces
• Joint type: Closed joint
• Joint width: 5 mm to 12 mm
• Cladding thickness: 6 mm to 60 mm, depending on the product
• Compatible cladding: Porcelain, composite panels, fibre cement, terrazzo, and other materials upon request

MT-N10.20

Open-joint undercut system for irregular panel surfaces

MT-N10.20 is designed for concealed panel fastening using undercut anchors. It uses permissive horizontal support rails to help compensate for surface variation, supporting a stable installation with regular open joints.

• Surface type: Irregular or uneven panel surfaces
• Joint type: Open joint
• Joint width: 5 mm to 12 mm
• Cladding thickness: 10 mm to 60 mm, depending on the product
• Compatible cladding: Natural stone, GFRC concrete, and other materials upon request

MT-N10.21

Closed-joint undercut system for irregular panel surfaces

MT-N10.21 is designed for concealed panel fastening using undercut anchors. It uses permissive horizontal support rails together with compressible backer rod and sealant to create a clean closed-joint façade finish.

• Surface type: Irregular or uneven panel surfaces
• Joint type: Closed joint
• Joint width: 5 mm to 12 mm
• Cladding thickness: 20 mm to 60 mm, depending on the product
• Compatible cladding: Natural stone, GFRC concrete, and other materials upon request